Clean your entire bathroom using THIS one simple ingredient

Bathroom cleaning is hardly anyone's favourite activity; however, it is one of the most essential areas in the house to be kept clean and hygienic. Due to frequent usage, warm temperatures and high moisture levels, bathrooms become dirt, soap scum, bacteria, mould and bad odour collectors in no time.

A lot of people think that to solve these problems, a cupboard full of strong chemical cleaners, each made for a specific surface, is necessary. But there is a simpler, cheaper and more natural way that is not visible to most people but is present in almost every home.Hydrogen peroxide is a strong yet soft agent that can clean, disinfect and make the colour white in almost every part of your bathroom. It is a good substitute to harsh products that still give the results like a professional without the use of unnecessary money or effort, since it is simple to use and can be found almost everywhere.

Why hydrogen peroxide works so well in bathrooms

Hydrogen peroxide is a naturally made compound that is formed when hydrogen and oxygen combine. To release oxygen, which helps in stain decomposition and also is the killing agent of germs, it is the surface with which the contact is made. Due to this process, it is very effective to bacteria, viruses, mould, and mildew. In contrast to bleach, hydrogen peroxide does not emit strong fumes and disintegrates into water and oxygen, thereby being a more environmentally friendly option for daily cleaning.

Moreover, its gentle bleaching action is also perfect for the treatment of discolouration of tiles, grout, and fixtures. So, you can disinfect and brighten your bathroom simultaneously with just one ingredient.

How to clean showers, baths and surfaces

A daily bathroom cleaning can be easily done by using a dilution of hydrogen peroxide and water. Standard 3 percent hydrogen peroxide should be used, and it should be diluted with water in equal parts. If you do not want the solution to lose its potency, keep it in a dark or opaque spray bottle, as the light can be the factor that inactivates it.Apply the solution to sinks, taps, countertops, shower doors, and bath surfaces. Allow the disinfecting process to take place by letting it stand for at least five minutes. After that, clean the surface with a damp cloth or sponge. If the surface is not a food one, you can also let it dry by air.For the removal of soap scum and the cleaning of heavily soiled shower walls or bath tubs, use hydrogen peroxide that has not been diluted.

Directly spray it onto the area and allow it to remain there for about ten minutes. Take a brush or a sponge and scrub the surface gently, then rinse with water thoroughly.

Tackling tough stains with baking soda

In cases where stains are really stubborn, a combination of hydrogen peroxide and baking soda gives even better results. Baking soda is a bit abrasive, which helps to remove grime without damaging the surface.Prepare a paste of equal parts of hydrogen peroxide and baking soda.

Spread the paste on the stains that you can find, for example, on the edges of the bath, the corners of the tiles or the floor of the shower. Allow it to sit there for up to 30 minutes, then scrub and rinse thoroughly. This method, in particular, is great for the accumulation of dirt and yellowing.

Cleaning grout lines and tiles

Grout lines are usually the most difficult areas of the washroom to maintain cleanliness.In case of light stains, a solution consisting of equal parts of hydrogen peroxide and water should be sprayed on the grout.

The mixture should be left for three to five minutes, then the area should be scrubbed with a small brush and rinsed.In case of stains that are deeply set, the mixture of hydrogen peroxide and baking soda should be put directly on the grout. It should be allowed to be there for at least five minutes before the scrubbing is done. Using it regularly will help to retain the brightness of the grout for a longer period.

Using hydrogen peroxide in the toilet

Another bathroom area that hydrogen peroxide can clean and sanitise is the toilet. One cup of 3 percent hydrogen peroxide should be poured into the bowl and left for up to 30 minutes. The toothbrush should then be used to scrub, and the toilet should be flushed. For hard water stains, a paste of hydrogen peroxide and baking soda should be applied, allowed to sit and then scrubbed thoroughly.It is possible to clean the whole bathroom by one simple and inexpensive way, that is by using hydrogen peroxide, hence the saving of time, money and effort.